Many people use dock de-icers to protect permanent docks and boathouses from ice damage. However, if these devices are not properly managed or installed, they can create large openings with thin ice that are unsafe for recreation during the winter months. These large areas of open water can also lead to greater ice damage to a dock.
TYPES OF DE-ICERS
- Bubbler: Works by releasing small air bubbles from a submerged perforated hose powered by an air compressor typically located on a dock or inside a boathouse. Bubbler de-icers don’t stir up lake bottom sediment and are less likely to cause dangerously thin ice conditions.
- Agitator: Works by circulating the lake water toward the surface. The entire device is submerged in the water and contains lubricating oil that can leak directly into the water from failed seals. This device needs to be used with a timer and/or thermostat to limit the amount of open water.
Both of these de-icers only need a few hours each day to do their jobs! In addition, a device that runs for only 2-4 hours a day will significantly reduce operating costs.
NEGATIVE IMPACTS OF A DE-ICER DEVICE
There are several potential negative impacts associated with the use of de-icing devices including:
- Opening up too large an area causing dock damage by allowing ice floes more room to accelerate in windy conditions
- Altering lake water temperature and light conditions which may impact algae and plant growth. As a result, this could also impact feeding habits of fish and other aquatic organisms
- Disturbing bottom sediments releasing nutrients such as phosphorus which will result in an increase in algae
- Creating a safety hazard which can significantly reduce or prohibit winter recreation opportunities
- De-icers are expensive to buy and operate and they do not guarantee less ice damage
- Circulator de-icers are noisy
CURRENT STATE LAW FOR DOCK DE-ICERS
An updated law (NH RSA 270:33) effective in 2019 for Dock De-Icers (see description of the law below) now requires all dock de-icers NOT to “impede either the ingress or egress to or from the ice from any property other than that of the owner of the device.” This usually means that de-icers need to be controlled, with timers and/or temperature controllers, so as not to prevent access to the lake from neighboring properties. According to the law, “The provisions of this section shall be enforced by any law enforcement agency under the direction of the department of safety pursuant to RSA 106-A:14 and the department of fish and game pursuant to RSA 206:26”’. LSPA suggests contacting NH Marine Patrol at (603) 293-2037 or by email at marinepatrol@dos.nh.gov if you are not able to safely access the lake from your property due to improper operation of a de-icer (other than your own).
NH RSA 270:33 Heating, Agitating, or Other Devices in Public Waters; Safety Hazard. No person shall put, place, operate, or cause to be put, placed, or operated in the waters of this state any so-called heating, agitating, or other device which inhibits or prevents the natural freezing of water, or forming of ice, and thereby impedes either the ingress or egress to or from the ice from any property other than that of the owner of the device. The person or persons responsible for the placement of the device shall ensure that warning signs are posted to warn of its location. Said signs shall read DANGER, THIN ICE and shall be of sufficient size to be readable at a distance of not less than 150 feet, and shall be visible from all directions and shall be equipped with reflectors and color-coded in a pattern unique for this purpose.
TIPS FOR SAFE AND EFFECTIVE USE OF DOCK DE-ICERS
- Choose the smallest possible size to maintain an ice free zone around your dock
- Set up your de-icer to form a narrow open water area around your dock (bubbler device works best for this)
- Point a circulator device in a vertical direction rather than at an angle towards the middle of the lake to minimize dangerously thin ice (use a purpose built bracket rather than ropes for easier adjustment – most manufactures offer them as an accessory)
- Use a thermostat or timer to run the de-icer only when the air temperature drops below freezing
- Run the device for only 2-4 hours a day
NEED A NEW DOCK?
When the time comes to replace your dock, consider installing one that can be removed from the water (such as the cantilever type). This would eliminate the need for a de-icer device at all!